Your pipeline goes quiet, so you turn on some ads. Leads arrive. Most want a free quote for a job you would never take. A few never answer the phone. After two months you decide pay-per-click does not work for builders.
It does work. But the ad is rarely the part that failed. The offer was vague, the page asked nothing, the wrong searches got through, or nobody called back until the next day.
This guide covers PPC for home builders, renovators and home improvement contractors from start to finish. Which platform to start with. How to set a budget from the value of a signed job. How to keep tire kickers out. And how to judge the result on booked appointments and signed work, not cost per lead.
It covers both Google Ads and Facebook paid campaigns, because the same rules decide whether either one pays.
What pay-per-click buys builders and contractors
Pay-per-click advertising means you pay a platform each time someone clicks your ad. For builders and contractors, two platforms carry almost all of it.
Google Ads (paid search). Your ad shows when someone types a search such as "home extension builder" plus your town. You are paying to be in front of someone who is already looking.
Facebook and Instagram ads (paid social, run through Meta). Your ad shows in the feed of local homeowners who were not searching for anything. You are paying to interrupt them with an offer good enough to act on.
Neither one buys a job. A click buys you a chance to answer a homeowner's question. The page, the form and the phone call decide what happens next.
Which platform to start with
Start with one. Running two platforms badly teaches you nothing about either.
| Google search ads | Facebook and Instagram ads | |
|---|---|---|
| Who sees it | People already searching for a builder or a service | Local homeowners scrolling, not searching |
| What it does | Catches demand that already exists | Creates interest that was not there yet |
| What it needs from you | A page that matches the search, tracking that works | One clear offer, good project photos, fast follow-up |
| Where it struggles | Small towns with few searches, broad or sloppy keywords | Vague "contact us" ads, slow call-backs |
| Typical inquiry | Fewer, further along in planning | More, earlier in planning, wider mix |
Start with Google search ads if
- People in your area already search for the work you do.
- You have a page, or can build one, that speaks to that exact service.
- Your jobs are high value and you would rather have five serious conversations than fifty forms.
Start with Facebook ads if
- You have a clear, specific offer. A house-and-land package, a townhouse release, a paid planning session, a named consultation.
- Search volume in your area is thin.
- You have no usable website yet. A Facebook lead form lets a homeowner respond without one.
- Someone can call every lead quickly. Social leads go cold fast.
What our own data shows
Contractor Scale's 2026 benchmark looked at 6,434 Australian and New Zealand inquiries across 44 measured client accounts, January to August 2026. Paid social produced 1,643 of them. Paid search produced 853.
So social created roughly twice the volume. But quality ran the other way. Among scored records, 17.8% of paid search inquiries became verified sales-qualified leads. For paid social it was 14%.
Two cautions. Those rates cover scored records only, and they are early pipeline signals, not signed-job rates. And this is our client cohort, not the whole market. You can read the full figures in the 2026 home builder benchmark report.
The practical reading: search tends to bring fewer, readier people. Social brings more people, earlier. Both can end in signed work.
Set your budget from the value of a signed job
Most budget advice for contractors is a percentage of revenue or project value. Ignore it.
Contract value is not your advertising budget. Margin is. A $600,000 build at a thin margin can afford less advertising than a $150,000 renovation at a healthy one.
Work it through in this order.
- Pick one job type. A custom home, an extension and a kitchen have different economics. Do not blend them.
- Write down the gross margin on a typical signed job of that type. Use real completed jobs.
- Decide how much of that margin you will give up to win the job. This is your allowable cost per signed job. It is your call, made with whoever watches cash flow.
- Work backward through your own sales history. How many site visits per signed job? How many suitable conversations per site visit? How many inquiries per suitable conversation?
- Check capacity. If you can only run two site visits a week, a campaign that produces ten is wasted money.
- Set a test allowance and a review date. A fixed amount you can afford to lose while you learn. Name who watches the spend.
A worked example
These numbers are made up to show the method. They are not benchmarks. Use your own.
| Step | Illustrative figure |
|---|---|
| Typical extension contract | $300,000 |
| Gross margin on that job | $60,000 |
| Margin you will spend to win it | $6,000 |
| Site visits needed per signed job (your history) | 4 |
| Suitable conversations needed per site visit | 2 |
| Inquiries needed per suitable conversation | 2 |
| Allowable cost per site visit | $1,500 |
| Allowable cost per suitable conversation | $750 |
| Allowable cost per inquiry | $375 |
Read the bottom row. This builder can pay $375 for an inquiry and still be inside the plan. Someone chasing a $40 lead would never see that.
Now worsen one ratio. If it took four inquiries to find one suitable conversation, the allowable cost per inquiry halves. Lead quality moves the budget more than click price does.
Three things to keep straight:
- Ad spend is separate from everything else. Page work, software and management fees are their own lines.
- You pay now and get paid later. A custom build can take months to sign. The test allowance has to survive that gap.
- A daily budget in Google Ads is an average, not a hard cap. Daily spend can vary. Check the monthly total.
If you have no sales history yet, the first test exists to create it. Spend a small fixed amount, record every stage, then redo this table with real numbers.
Build the offer before the ad
"Contact us for a free quote" is the offer that fills your week with tire kickers. It asks for nothing and promises everything.
A good offer names a useful first step and draws a line around it.
- Name it. A project consultation, a feasibility discussion, a site assessment. Whatever you actually deliver.
- Say what the homeowner gets. For example: a discussion of scope, the design stage, the site, and what a realistic budget depends on.
- Say what it is not. A first conversation is not a detailed quote, measured drawings or a full feasibility report.
- Say what is paid. If proper scoping is paid prelim work, state that before anyone assumes it is free.
That last line does more filtering than any targeting setting. J & J Custom Homes, a Contractor Scale client in Georgia, packaged a paid prelim offer and tightened the handoff from marketing to sales. The client reported five paid consults sold in fourteen days. That is one client's reported result, not a forecast for your business.
Keep availability honest too. Only say "three spots this month" if it is true.
Make the page and the form do the filtering
The search, the ad, the page and the form should tell one story. If the ad says "home extensions in Hamilton" and the page opens with your company history, you lose the people you paid for.
The landing page
- One service, one area, one offer.
- Real photos of that type of work, with permission to use them.
- What happens after they submit, and how soon.
- One main action. Not five.
- Tested on a phone, start to finish.
The landing pages guide goes through the build in detail.
The form questions
Start with name, phone, email and one project question. "What are you hoping to build or change?" works well. Then add questions only to fix a problem you have seen.
Useful additions when wrong-fit inquiries keep arriving:
- Project address or neighborhood. A person's phone location is not the site address.
- Project type. A short list of the work you accept.
- Stage. Have land, have plans, or still working it out.
- Budget range, with a "not sure yet" option.
Every extra question costs you some completions. That is a trade, not a free win. Compare suitable conversations before and after, not form counts.
And do not treat "not sure yet" as a bad lead. Missing plans or an unknown budget means the project is early. That is something to explore on the call, not a reason to throw the inquiry out.
On Facebook, if too many people submit without meaning to, tighten the form introduction and consider Meta's higher intent option.
Keep the wrong searches out
On Google Ads, the keyword is what you bid on. The search term is what the person actually typed. They are not the same, and the gap is where money leaks.
Negative keywords
A negative keyword stops your ad showing for a search. Build your list from work you truly do not want.
- Job seekers. Searches about jobs, careers, apprenticeships and wages.
- Services you do not offer. If you never build fences or decks alone, exclude those.
- DIY and supply searches. People looking for plans, kits or materials, if that is not your business.
Then be careful. Blunt negatives block good work.
- Blocking "small" can remove a compact custom home you would happily build.
- Blocking "kitchen" can remove a major renovation that includes one.
- Blocking "cost" or "price" can remove a serious planning inquiry. A cost search is often how a real project starts.
Use the narrowest negative that fixes the problem you saw. Write the reason beside it. Never copy another builder's negative list without checking it against the work you accept.
Keywords and match types
Start with tightly related phrase or exact match keywords around one service and area. Broad match reaches further and needs reliable conversion tracking and closer watching.
Keep searches for your own business name in a separate campaign. Someone searching your name already knows you. Mixing them in makes the account look better than it is.
Location
Target where you actually build. Then check your exclusions do not block part of it. A homeowner planning a build in your area may live somewhere else right now, so ask for the project address in the form.
On Facebook, the filter is the ad itself
Facebook has no negative keywords. The opening line, the photo and the offer do the sorting. Name the project type and the area in the first sentence. A kitchen photo on a new-build ad pulls in the wrong people.
Answer the lead before it goes cold
Here is the uncomfortable number. In our 2026 benchmark, the median time to a first manual call was 30.5 hours. That is measured across 1,601 Australian and New Zealand inquiries that carried the metric. Manual contact was recorded for 48.7% of inquiries in that cohort.
Recording is incomplete, so those figures are a warning, not a verdict. But the pattern is plain: the click gets paid for, then the inquiry sits.
Before you spend anything:
- Name one person who owns new inquiries.
- Decide where each lead is recorded and how that person is told.
- Submit a test lead yourself. Confirm it arrives, with the answers, where the owner can see it.
- Set an honest call-back expectation on the confirmation screen.
On the call, use what they already told you. Confirm the project, the location, the stage and who is deciding. Then sort each inquiry into one of four groups: suitable and ready, suitable but later, not a fit, not yet reached.
"Suitable but later" is where much of the value sits. Homeowners can take months to choose a builder. The guide to nurturing leads covers how to keep those people warm without chasing them.
Why cheap leads are often a symptom
A falling cost per lead feels like progress. Often it means something upstream got looser.
- The offer got vaguer, so more people said yes to it.
- The form got shorter, so less-committed people finished it.
- The keywords got broader, so cheaper, less relevant searches came through.
- The platform found the people most likely to fill in forms, not the people most likely to build.
That last one matters. Ad platforms optimize for the event you give them. Tell Google or Meta that a form is the goal and they will find you form-fillers. If the form is weak, the machine gets very good at finding weak leads.
Cheap is not always bad. JRA Construction in Auckland ran Facebook lead ads for an eight-unit townhouse project. The published case study records 287 form leads at about $4,424 total spend, around $15.41 each. Every unit went under contract and the client asked to pull the ads. Low-cost leads suited a clear offer with a defined product. That is one project's published result, not a forecast.
So cost per lead tells you nothing by itself. Here is a made-up comparison to show why:
| Campaign A | Campaign B | |
|---|---|---|
| Spend | $3,000 | $3,000 |
| Inquiries | 30 | 10 |
| Cost per inquiry | $100 | $300 |
| Suitable conversations | 5 | 5 |
| Site visits held | 2 | 4 |
| Cost per site visit held | $1,500 | $750 |
Campaign A wins on cost per lead and loses where it counts. It also cost someone the time to call 25 people who were never going to build.
Common mistakes
- Running a vague offer. "Free quote" attracts everyone, including people collecting three prices for a job they will not start.
- Setting budget from contract value. Margin, cash flow and capacity set the budget. Headline price does not.
- Counting a button click as a lead. A click on "submit" is not a saved inquiry. Test that the lead actually arrives.
- Copying a negative keyword list. Blanket negatives block work you would take.
- Sending every ad to a generic page. The page has to continue the promise the ad made.
- Leaving leads for tomorrow. The ad did its job. The delay lost the conversation.
- Scaling spend before checking follow-up. More budget into a leaking process buys more leaks.
How to tell it is working
Judge the whole path, not the top of it. These are the numbers to watch, in order.
| Stage | What to count | What to work out |
|---|---|---|
| Spend and inquiries | Ad spend, distinct project inquiries | Cost per inquiry. Note it, do not judge on it. |
| Suitable inquiries | Real contact details, right area, work you accept | Cost per suitable inquiry, and why the others did not fit |
| Conversations | People you actually spoke with | Share of suitable inquiries reached, and time to first call |
| Appointments | Site visits or meetings booked, and held | Cost per held appointment |
| Paid prelims and proposals | Paid planning work sold, proposals sent | Cost per paid prelim |
| Signed work | Contracts signed, with margin | Ad spend against margin on signed jobs |
A simple PPC monitoring routine
Daily, two minutes. Any new leads? Has each one been called? Is anything untouched?
Weekly, twenty minutes. Read the actual search terms in Google Ads. Add narrow negatives with a reason. On Facebook, read the form answers and note which photo each lead came from. Check spend against the test allowance.
Monthly, one hour. Fill in the table above. Compare cost per held appointment with your allowable figure from the budget table. Decide one change for next month and write it down.
Find the stage that is failing
- Few clicks or little attention. Check the offer, the opening line and the photo.
- Clicks but few inquiries. Check the page and the form.
- Plenty of inquiries, wrong work or wrong area. Check search terms, location settings and ad wording.
- Good inquiries, nobody reached. Check who owns the call and how fast it happens.
- Meetings held, nothing signs. The sales process or the buying cycle is the limit, not the ad.
Allow for time. A custom build campaign cannot be judged on signed contracts in its first month. Early on, watch suitable conversations and held appointments. Do not credit an ad with a contract you cannot connect to it.
Davies Building in Brisbane shows the kind of result to measure. The published case study records two major remodels contracted from Google Ads demand, about $1.2M combined. Poor-fit inquiries were ruled out fast, not chased. It is one client's result, not a forecast for yours.
Frequently asked questions
Is Google Ads or Facebook better for home builders?
Neither is better everywhere. Google search ads reach people already looking for a builder, so inquiries tend to be fewer and further along. Facebook ads create interest and suit a clear, specific offer. In Contractor Scale's 2026 benchmark, paid social brought more inquiries and paid search had a higher verified-qualified rate among scored records. Start with the one that fits your offer and follow-up capacity.
How much should a home builder spend on PPC?
There is no universal figure. Start from the gross margin on a typical signed job. Decide how much of it you will spend to win that job. Then work backward through your own ratios of inquiries, conversations and site visits. Set a fixed test allowance you can afford while you learn, with a review date. Keep ad spend separate from page and management costs.
How long before I can judge a campaign?
Set the review date before you launch. In the first weeks, judge on suitable conversations and held appointments, because signed work takes longer. Fix urgent problems such as broken tracking or wrong locations straight away. Otherwise, avoid changing several things at once. A custom build can take months to sign, so one quiet week proves very little either way.
Should I add "cost" and "price" as negative keywords?
Not automatically. A cost search can be early research, or it can be how a serious project begins. Read the full search term, then check what the resulting conversation became. Exclude clear wrong intent, such as job seekers or services you do not offer. Blanket negatives on cost, price or budget can remove inquiries you would welcome.
Do I need a website to run Facebook paid campaigns?
No. A Facebook lead form lets a homeowner submit their details without leaving the app. You still need a credible business page, real project photos, a specific offer and someone ready to call. A dedicated landing page becomes worth it when you want more room for proof and qualifying questions. Compare suitable conversations from each path, not form counts.
Should I run ads myself or pay an agency?
If your revenue is under about $500,000, run them yourself and put the money into advertising, not agency fees. One platform, one offer and a tested lead handoff is manageable for an owner. Above that, the question is time. Managing search terms, pages and daily follow-up is real work. If you compare agencies, ask how they report appointments and signed work, not leads.
Next steps
- Read the hub guide to see where paid ads sit in the full system: Home Builder Marketing.
- Fix the page your ads send people to: Landing Pages for Home Builders.
- Set up follow-up for the leads who are not ready yet: Nurturing Leads.
- Build the free search presence that supports your paid ads: Local SEO.
- For the full Google search setup, step by step, use the Contractor Scale Google Ads playbook.
- For the Facebook lead ad walkthrough and ad template, use the Contractor Scale Facebook Ads playbook.
- See the client results mentioned above in context: Contractor Scale case studies.
- Comparing agencies? Read Best Home Builder Marketing Agencies 2026.
Builders who would rather have this done for them can see how Contractor Scale works.

